# text: "This program requires System 7.1 or later."
DITL_129.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=210 y1=55 x2=276 y2=75
# text: "Sorry!"
# item 1: TEXT (0x88) disabled
# bounds: x1=62 y1=10 x2=278 y2=41
# text: "MultiTimer Pro requires a display with 16 grays or better."
DITL_130.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=226 y1=118 x2=292 y2=138
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=62 y1=10 x2=293 y2=108
# text: "MultiTimer Pro’s log windows, at their wider configuration, will not fit on this monitor.\n\nA display 640 pixels wide or better is recommended."
DITL_131.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=225 y1=88 x2=291 y2=108
# text: "Quit"
# item 1: TEXT (0x88) disabled
# bounds: x1=62 y1=10 x2=292 y2=77
# text: "This copy of MultiTimer Pro is on a locked or read-only disk. In order to use MultiTimer Pro you must copy it onto your hard disk."
DITL_150.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=231 y1=71 x2=297 y2=91
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=13 y1=13 x2=303 y2=48
# text: "Code accepted. This copy of MultiTimer Pro is now registered."
# item 2: TEXT (0x88) disabled
# bounds: x1=13 y1=58 x2=118 y2=75
# text: "Thanks again!!"
DITL_151.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=215 y1=77 x2=288 y2=97
# text: "Try Again"
# item 1: BUTTON (0x04) enabled
# bounds: x1=22 y1=77 x2=90 y2=97
# text: "Exit"
# item 2: TEXT (0x88) disabled
# bounds: x1=16 y1=12 x2=289 y2=64
# text: "Sorry, that code didn’t work. \nMake sure both the code and your name are typed correctly."
DITL_152.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=288 y1=176 x2=354 y2=196
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=77 y1=21 x2=350 y2=72
# text: "The file “^0” seems to be missing — it should be in the same folder as MultiTimer Pro itself."
# item 2: TEXT (0x88) disabled
# bounds: x1=77 y1=83 x2=356 y2=165
# text: "If you can find this file, double-click it from the Finder. If you can’t, go to http://www.ironsoftware.com for the full MultiTimer Pro package, or contact Karl Bunker at karlbunker@aol.com."
DITL_153.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=284 y1=159 x2=352 y2=179
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=64 y1=16 x2=359 y2=81
# text: "Your MultiTimer Pro preferences file was damaged and has been deleted. Your preferences have been reset to default values. "
# item 2: TEXT (0x88) disabled
# bounds: x1=64 y1=88 x2=354 y2=152
# text: "You may want to restore your preferences via “Preferences” under the Edit menu. No other action is necessary, and this problem should not recurr."
DITL_200.txt
# 82 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=294 y1=330 x2=360 y2=350
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=199 y1=330 x2=265 y2=350
# text: "Cancel"
# item 2: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=2 y1=8 x2=368 y2=33
# CNTL resource ID: 179
# item 3: CHECKBOX (0x05) enabled
# bounds: x1=16 y1=42 x2=130 y2=58
# text: "Sound effects"
# item 4: CHECKBOX (0x05) enabled
# bounds: x1=16 y1=84 x2=185 y2=100
# text: "Save timer data every"
# item 5: EDIT_TEXT (0x10) enabled
# bounds: x1=188 y1=84 x2=213 y2=100
# text: "5"
# item 6: TEXT (0x88) disabled
# bounds: x1=217 y1=84 x2=275 y2=101
# text: "minutes"
# item 7: CHECKBOX (0x05) enabled
# bounds: x1=16 y1=105 x2=348 y2=121
# text: "Floating window on by default in new modules"
# item 8: CHECKBOX (0x05) enabled
# bounds: x1=16 y1=292 x2=347 y2=308
# text: "Allow changes to session time in main window"
# item 9: CHECKBOX (0x05) enabled
# bounds: x1=16 y1=272 x2=347 y2=288
# text: "Include expenses in “Total Charge” subtotals"
# item 10: RADIO_BUTTON (0x06) enabled
# bounds: x1=33 y1=195 x2=170 y2=211
# text: "Round up"
# item 11: RADIO_BUTTON (0x06) enabled
# bounds: x1=33 y1=211 x2=170 y2=227
# text: "Round down"
# item 12: RADIO_BUTTON (0x06) enabled
# bounds: x1=33 y1=227 x2=170 y2=243
# text: "Round to nearest"
# item 13: TEXT (0x88) disabled
# bounds: x1=206 y1=196 x2=281 y2=212
# text: "Increment:"
# item 14: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=207 y1=215 x2=336 y2=235
# CNTL resource ID: 183
# item 15: CUSTOM (0x00) enabled
# bounds: x1=185 y1=193 x2=186 y2=242
# data: ""
# item 16: TEXT (0x88) disabled
# bounds: x1=28 y1=177 x2=206 y2=193
# text: "Rounding time increments:"
# item 17: CUSTOM (0x80) disabled
# bounds: x1=16 y1=187 x2=354 y2=247
# data: ""
# item 18: TEXT (0x88) disabled
# bounds: x1=17 y1=128 x2=211 y2=144
# text: "Hotkey to hide/show floater:"
# item 19: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=213 y1=126 x2=357 y2=146
# CNTL resource ID: 184
# item 20: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=91 y1=153 x2=211 y2=173
# CNTL resource ID: 188
# item 21: TEXT (0x88) disabled
# bounds: x1=17 y1=154 x2=88 y2=170
# text: "Weeks run"
# item 22: TEXT (0x88) disabled
# bounds: x1=214 y1=155 x2=244 y2=171
# text: "thru"
# item 23: CUSTOM (0x00) enabled
# bounds: x1=247 y1=153 x2=342 y2=172
# data: ""
# item 24: CHECKBOX (0x05) enabled
# bounds: x1=16 y1=252 x2=363 y2=268
# text: "Always show ignored records when log is opened"
# item 25: CHECKBOX (0x05) enabled
# bounds: x1=16 y1=63 x2=252 y2=79
# text: "Show “About” window at launch"
# item 26: CHECKBOX (0x05) enabled
# bounds: x1=16411 y1=46 x2=16635 y2=62
# text: "Notify if Mac is idle more than"
# item 27: EDIT_TEXT (0x10) enabled
# bounds: x1=16638 y1=46 x2=16663 y2=62
# text: "10"
# item 28: TEXT (0x88) disabled
# bounds: x1=16667 y1=46 x2=16722 y2=62
# text: "minutes"
# item 29: RADIO_BUTTON (0x06) enabled
# bounds: x1=16417 y1=67 x2=16725 y2=83
# text: "Notify next time MT Pro is brought to front"
# item 30: RADIO_BUTTON (0x06) enabled
# bounds: x1=16417 y1=83 x2=16725 y2=99
# text: "Notify as soon as activity resumes"
# item 31: CUSTOM (0x80) disabled
# bounds: x1=16400 y1=56 x2=16738 y2=103
# data: ""
# item 32: RADIO_BUTTON (0x06) enabled
# bounds: x1=16417 y1=130 x2=16732 y2=146
# text: "Always show “Stop timer and quit?” prompt"
# item 33: RADIO_BUTTON (0x06) enabled
# bounds: x1=16417 y1=146 x2=16732 y2=162
# text: "Show prompt unless shutting down"
# item 34: RADIO_BUTTON (0x06) enabled
# bounds: x1=16417 y1=162 x2=16732 y2=178
# text: "Never show prompt"
# item 35: TEXT (0x88) disabled
# bounds: x1=16412 y1=112 x2=16631 y2=128
# text: "Quitting while a timer is running:"
# item 36: CUSTOM (0x80) disabled
# bounds: x1=16399 y1=122 x2=16737 y2=182
# data: ""
# item 37: RADIO_BUTTON (0x06) enabled
# bounds: x1=16417 y1=208 x2=16732 y2=224
# text: "Show “Stop timer and switch?” prompt"
# item 38: RADIO_BUTTON (0x06) enabled
# bounds: x1=16417 y1=224 x2=16732 y2=240
# text: "Stop current timer and switch, no prompt"
# item 39: RADIO_BUTTON (0x06) enabled
# bounds: x1=16417 y1=240 x2=16732 y2=256
# text: "Stop current, switch, start new, no prompt"
# item 40: TEXT (0x88) disabled
# bounds: x1=16412 y1=190 x2=16702 y2=206
# text: "Switching modules while a timer is running:"
# item 41: CUSTOM (0x80) disabled
# bounds: x1=16399 y1=200 x2=16737 y2=260
# data: ""
# item 42: CHECKBOX (0x05) enabled
# bounds: x1=16399 y1=291 x2=16708 y2=307
# text: "Auto-save all changes to logs when closing"
# item 43: CHECKBOX (0x05) enabled
# bounds: x1=16399 y1=269 x2=16610 y2=285
# text: "Colorized stopwatch control"
# item 44: CHECKBOX (0x05) enabled
# bounds: x1=16401 y1=47 x2=16655 y2=63
# text: "Exclude ignored records from Copy"
# item 45: CHECKBOX (0x05) enabled
# bounds: x1=16417 y1=89 x2=16669 y2=105
# text: "Use short format date (“1/9/98”)"
# item 46: RADIO_BUTTON (0x06) enabled
# bounds: x1=16417 y1=109 x2=16662 y2=125
# text: "Date and time together"
# item 47: RADIO_BUTTON (0x06) enabled
# bounds: x1=16417 y1=126 x2=16662 y2=142
# text: "Date and time separated by a tab"
# item 48: TEXT (0x88) disabled
# bounds: x1=16412 y1=69 x2=16537 y2=85
# text: "Format of “When”:"
# item 49: CUSTOM (0x80) disabled
# bounds: x1=16400 y1=79 x2=16738 y2=148
# data: ""
# item 50: RADIO_BUTTON (0x06) enabled
# bounds: x1=16417 y1=176 x2=16736 y2=192
# text: "With text, not separated (“2 hr, 26 min”)"
# item 51: RADIO_BUTTON (0x06) enabled
# bounds: x1=16417 y1=193 x2=16736 y2=209
# text: "Without text, not separated (“2:26”)"
# item 52: RADIO_BUTTON (0x06) enabled
# bounds: x1=16417 y1=210 x2=16736 y2=226
# text: "Without text, separated by a tab (“2” “26”)"
# item 53: TEXT (0x88) disabled
# bounds: x1=16412 y1=156 x2=16567 y2=172
# text: "Format of “Total Time”:"
# item 54: CUSTOM (0x80) disabled
# bounds: x1=16400 y1=166 x2=16738 y2=231
# data: ""
# item 55: CHECKBOX (0x05) enabled
# bounds: x1=16417 y1=259 x2=16577 y2=275
# text: "Include “/hr” in Rate"
# item 56: CHECKBOX (0x05) enabled
# bounds: x1=16417 y1=276 x2=16603 y2=292
# text: "Include currency symbol"
# item 57: TEXT (0x88) disabled
# bounds: x1=16412 y1=239 x2=16659 y2=255
# text: "Format of “Rate” and “Total Charge”:"
# item 58: CUSTOM (0x80) disabled
# bounds: x1=16401 y1=249 x2=16739 y2=299
# data: ""
# item 59: TEXT (0x88) disabled
# bounds: x1=16574 y1=66 x2=16686 y2=82
# text: "Ignored records:"
# item 60: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=16688 y1=65 x2=16728 y2=83
# CNTL resource ID: 180
# item 61: TEXT (0x88) disabled
# bounds: x1=16400 y1=66 x2=16514 y2=82
# text: "Sessions default:"
# item 62: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=16516 y1=65 x2=16556 y2=83
# CNTL resource ID: 180
# item 63: TEXT (0x88) disabled
# bounds: x1=16424 y1=100 x2=16514 y2=116
# text: "Adjustments:"
# item 64: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=16516 y1=99 x2=16556 y2=117
# CNTL resource ID: 180
# item 65: TEXT (0x88) disabled
# bounds: x1=16395 y1=134 x2=16514 y2=150
# text: "Expenses default:"
# item 66: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=16516 y1=133 x2=16556 y2=151
# CNTL resource ID: 180
# item 67: TEXT (0x88) disabled
# bounds: x1=16416 y1=168 x2=16514 y2=184
# text: "Sessions total:"
# item 68: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=16516 y1=167 x2=16556 y2=185
# CNTL resource ID: 180
# item 69: TEXT (0x88) disabled
# bounds: x1=16411 y1=202 x2=16514 y2=218
# text: "Expenses total:"
# item 70: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=16516 y1=201 x2=16556 y2=219
# CNTL resource ID: 180
# item 71: TEXT (0x88) disabled
# bounds: x1=16424 y1=236 x2=16514 y2=252
# text: "Module total:"
# item 72: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=16516 y1=235 x2=16556 y2=253
# CNTL resource ID: 180
# item 73: TEXT (0x88) disabled
# bounds: x1=16649 y1=100 x2=16686 y2=116
# text: "Days:"
# item 74: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=16688 y1=99 x2=16728 y2=117
# CNTL resource ID: 180
# item 75: TEXT (0x88) disabled
# bounds: x1=16637 y1=134 x2=16686 y2=150
# text: "Weeks:"
# item 76: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=16688 y1=133 x2=16728 y2=151
# CNTL resource ID: 180
# item 77: TEXT (0x88) disabled
# bounds: x1=16631 y1=168 x2=16686 y2=184
# text: "Months:"
# item 78: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=16688 y1=167 x2=16728 y2=185
# CNTL resource ID: 180
# item 79: TEXT (0x88) disabled
# bounds: x1=16643 y1=202 x2=16686 y2=218
# text: "Years:"
# item 80: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=16688 y1=201 x2=16728 y2=219
# CNTL resource ID: 180
# item 81: CUSTOM (0x80) disabled
# bounds: x1=2 y1=33 x2=368 y2=315
# data: ""
DITL_201_CustomGetFile.txt
# 11 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=252 y1=181 x2=332 y2=201
# text: "Select"
# item 1: BUTTON (0x04) enabled
# bounds: x1=252 y1=150 x2=332 y2=170
# text: "Cancel"
# item 2: UNKNOWN (0x81) disabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: 0001E866
# item 3: CUSTOM (0x00) enabled
# bounds: x1=235 y1=54 x2=337 y2=70
# data: ""
# item 4: BUTTON (0x04) enabled
# bounds: x1=252 y1=78 x2=332 y2=98
# text: "Eject"
# item 5: BUTTON (0x04) enabled
# bounds: x1=252 y1=106 x2=332 y2=126
# text: "Desktop"
# item 6: CUSTOM (0x00) enabled
# bounds: x1=12 y1=75 x2=230 y2=205
# data: ""
# item 7: CUSTOM (0x00) enabled
# bounds: x1=12 y1=52 x2=230 y2=71
# data: ""
# item 8: PICTURE (0xC0) disabled
# bounds: x1=251 y1=137 x2=333 y2=138
# PICT resource ID: 11
# item 9: TEXT (0x88) disabled
# bounds: x1=12 y1=7 x2=340 y2=39
# text: "^0"
# item 10: PICTURE (0xC0) disabled
# bounds: x1=9 y1=42 x2=340 y2=43
# PICT resource ID: 11
DITL_203.txt
# 16 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=252 y1=163 x2=332 y2=183
# text: "Add"
# item 1: BUTTON (0x04) enabled
# bounds: x1=252 y1=274 x2=332 y2=294
# text: "Cancel"
# item 2: UNKNOWN (0x81) disabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: 000101FD
# item 3: CUSTOM (0x00) enabled
# bounds: x1=235 y1=33 x2=337 y2=49
# data: ""
# item 4: BUTTON (0x04) enabled
# bounds: x1=252 y1=60 x2=332 y2=80
# text: "Eject"
# item 5: BUTTON (0x04) enabled
# bounds: x1=252 y1=88 x2=332 y2=108
# text: "Desktop"
# item 6: CUSTOM (0x00) enabled
# bounds: x1=12 y1=57 x2=230 y2=187
# data: ""
# item 7: CUSTOM (0x00) enabled
# bounds: x1=12 y1=31 x2=230 y2=50
# data: ""
# item 8: PICTURE (0xC0) disabled
# bounds: x1=251 y1=119 x2=333 y2=120
# PICT resource ID: 11
# item 9: PICTURE (0xC0) disabled
# bounds: x1=6 y1=194 x2=338 y2=195
# PICT resource ID: 11
# item 10: CUSTOM (0x00) enabled
# bounds: x1=12 y1=202 x2=230 y2=300
# data: ""
# item 11: BUTTON (0x04) enabled
# bounds: x1=252 y1=210 x2=332 y2=230
# text: "Done"
# item 12: BUTTON (0x04) enabled
# bounds: x1=252 y1=132 x2=332 y2=152
# text: "Add All"
# item 13: BUTTON (0x04) enabled
# bounds: x1=252 y1=242 x2=332 y2=262
# text: "Remove"
# item 14: TEXT (0x88) disabled
# bounds: x1=12 y1=3 x2=337 y2=19
# text: "Select two or more log files:"
# item 15: PICTURE (0xC0) disabled
# bounds: x1=6 y1=21 x2=338 y2=22
# PICT resource ID: 11
DITL_210.txt
# 36 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=529 y1=286 x2=597 y2=306
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=444 y1=288 x2=508 y2=308
# text: "Cancel"
# item 2: CHECKBOX (0x05) enabled
# bounds: x1=28 y1=26 x2=221 y2=42
# text: "Export selected area only"
# item 3: CHECKBOX (0x05) enabled
# bounds: x1=28 y1=43 x2=242 y2=59
# text: "Don’t export ignored records"
# item 4: CHECKBOX (0x05) enabled
# bounds: x1=40 y1=85 x2=200 y2=101
# text: "Total For..."
# item 5: CHECKBOX (0x05) enabled
# bounds: x1=40 y1=102 x2=200 y2=118
# text: "When"
# item 6: CHECKBOX (0x05) enabled
# bounds: x1=40 y1=119 x2=200 y2=135
# text: "Total Time"
# item 7: CHECKBOX (0x05) enabled
# bounds: x1=40 y1=136 x2=200 y2=152
# text: "Rate"
# item 8: CHECKBOX (0x05) enabled
# bounds: x1=40 y1=153 x2=200 y2=169
# text: "Total Charge"
# item 9: CHECKBOX (0x05) enabled
# bounds: x1=40 y1=170 x2=200 y2=186
# text: "Category"
# item 10: CHECKBOX (0x05) enabled
# bounds: x1=40 y1=187 x2=200 y2=203
# text: "Ignore"
# item 11: CHECKBOX (0x05) enabled
# bounds: x1=40 y1=204 x2=200 y2=220
# text: "Note"
# item 12: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=38 y1=262 x2=213 y2=283
# CNTL resource ID: 177
# item 13: TEXT (0x88) disabled
# bounds: x1=19 y1=241 x2=82 y2=257
# text: "File type:"
# item 14: CUSTOM (0x80) disabled
# bounds: x1=11 y1=251 x2=246 y2=290
# data: ""
# item 15: CHECKBOX (0x05) enabled
# bounds: x1=279 y1=26 x2=511 y2=42
# text: "Put column titles in first record"
# item 16: CHECKBOX (0x05) enabled
# bounds: x1=289 y1=63 x2=541 y2=79
# text: "Use short format date (“1/9/98”)"
# item 17: RADIO_BUTTON (0x06) enabled
# bounds: x1=289 y1=85 x2=525 y2=101
# text: "Date and time in single field"
# item 18: RADIO_BUTTON (0x06) enabled
# bounds: x1=289 y1=102 x2=525 y2=118
# text: "Date and time in separate fields"
# item 19: RADIO_BUTTON (0x06) enabled
# bounds: x1=289 y1=147 x2=590 y2=163
# text: "With text, in a single field (“2 hr, 26 min”)"
# item 20: RADIO_BUTTON (0x06) enabled
# bounds: x1=289 y1=164 x2=590 y2=180
# text: "Without text, in a single field (“2:26”)"
# item 21: RADIO_BUTTON (0x06) enabled
# bounds: x1=289 y1=181 x2=590 y2=197
# text: "Without text, in two fields (“2”, “26”)"
# item 22: CHECKBOX (0x05) enabled
# bounds: x1=289 y1=226 x2=451 y2=242
# text: "Include “/hr” in Rate"
# item 23: CHECKBOX (0x05) enabled
# bounds: x1=289 y1=243 x2=475 y2=259
# text: "Include currency symbol"
# item 24: TEXT (0x88) disabled
# bounds: x1=279 y1=44 x2=404 y2=60
# text: "Format of “When”:"
# item 25: CUSTOM (0x80) disabled
# bounds: x1=272 y1=54 x2=592 y2=122
# data: ""
# item 26: TEXT (0x88) disabled
# bounds: x1=279 y1=127 x2=434 y2=143
# text: "Format of “Total Time”:"
# item 27: CUSTOM (0x80) disabled
# bounds: x1=272 y1=138 x2=592 y2=201
# data: ""
# item 28: TEXT (0x88) disabled
# bounds: x1=279 y1=207 x2=526 y2=223
# text: "Format of “Rate” and “Total Charge”:"
# item 29: CUSTOM (0x80) disabled
# bounds: x1=272 y1=218 x2=592 y2=264
# data: ""
# item 30: TEXT (0x88) disabled
# bounds: x1=270 y1=6 x2=402 y2=22
# text: "Formatting options:"
# item 31: CUSTOM (0x80) disabled
# bounds: x1=262 y1=17 x2=601 y2=271
# data: ""
# item 32: TEXT (0x88) disabled
# bounds: x1=28 y1=65 x2=176 y2=81
# text: "Export these columns:"
# item 33: CUSTOM (0x80) disabled
# bounds: x1=21 y1=76 x2=236 y2=225
# data: ""
# item 34: TEXT (0x88) disabled
# bounds: x1=19 y1=6 x2=106 y2=22
# text: "Export what:"
# item 35: CUSTOM (0x80) disabled
# bounds: x1=11 y1=17 x2=246 y2=232
# data: ""
DITL_211.txt
# 28 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=284 y1=378 x2=352 y2=398
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=285 y1=346 x2=349 y2=366
# text: "Cancel"
# item 2: CHECKBOX (0x05) enabled
# bounds: x1=37 y1=27 x2=230 y2=43
# text: "Export selected area only"
# item 3: CHECKBOX (0x05) enabled
# bounds: x1=37 y1=44 x2=251 y2=60
# text: "Don’t export ignored records"
# item 4: CHECKBOX (0x05) enabled
# bounds: x1=45 y1=83 x2=137 y2=99
# text: "Total For..."
# item 5: CHECKBOX (0x05) enabled
# bounds: x1=157 y1=83 x2=217 y2=99
# text: "When"
# item 6: CHECKBOX (0x05) enabled
# bounds: x1=234 y1=83 x2=302 y2=99
# text: "Ignore"
# item 7: CHECKBOX (0x05) enabled
# bounds: x1=37 y1=140 x2=269 y2=156
# text: "Put column titles in first record"
# item 8: CHECKBOX (0x05) enabled
# bounds: x1=44 y1=178 x2=296 y2=194
# text: "Use short format date (“1/9/98”)"
# item 9: RADIO_BUTTON (0x06) enabled
# bounds: x1=44 y1=225 x2=345 y2=241
# text: "With text, in a single field (“2 hr, 26 min”)"
# item 10: RADIO_BUTTON (0x06) enabled
# bounds: x1=44 y1=242 x2=345 y2=258
# text: "Without text, in a single field (“2:26”)"
# item 11: RADIO_BUTTON (0x06) enabled
# bounds: x1=44 y1=259 x2=345 y2=275
# text: "Without text, in two fields (“2”, “26”)"
# item 12: CHECKBOX (0x05) enabled
# bounds: x1=44 y1=304 x2=230 y2=320
# text: "Include currency symbol"
# item 13: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=44 y1=366 x2=219 y2=387
# CNTL resource ID: 178
# item 14: TEXT (0x88) disabled
# bounds: x1=34 y1=64 x2=182 y2=80
# text: "Export these columns:"
# item 15: CUSTOM (0x80) disabled
# bounds: x1=26 y1=75 x2=346 y2=107
# data: ""
# item 16: TEXT (0x88) disabled
# bounds: x1=34 y1=158 x2=159 y2=174
# text: "Format of “When”:"
# item 17: CUSTOM (0x80) disabled
# bounds: x1=26 y1=169 x2=346 y2=201
# data: ""
# item 18: TEXT (0x88) disabled
# bounds: x1=34 y1=205 x2=182 y2=221
# text: "Format of Total Times:"
# item 19: CUSTOM (0x80) disabled
# bounds: x1=26 y1=216 x2=346 y2=281
# data: ""
# item 20: TEXT (0x88) disabled
# bounds: x1=34 y1=284 x2=198 y2=300
# text: "Format of Total Charges:"
# item 21: CUSTOM (0x80) disabled
# bounds: x1=26 y1=295 x2=346 y2=327
# data: ""
# item 22: TEXT (0x88) disabled
# bounds: x1=27 y1=342 x2=90 y2=358
# text: "File type:"
# item 23: CUSTOM (0x80) disabled
# bounds: x1=17 y1=352 x2=230 y2=394
# data: ""
# item 24: TEXT (0x88) disabled
# bounds: x1=25 y1=7 x2=112 y2=23
# text: "Export what:"
# item 25: CUSTOM (0x80) disabled
# bounds: x1=17 y1=18 x2=354 y2=115
# data: ""
# item 26: TEXT (0x88) disabled
# bounds: x1=25 y1=121 x2=157 y2=137
# text: "Formatting options:"
# item 27: CUSTOM (0x80) disabled
# bounds: x1=17 y1=132 x2=354 y2=336
# data: ""
DITL_350.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=233 y1=76 x2=293 y2=96
# text: "OK"
# item 1: ICON (0xA0) disabled
# bounds: x1=15 y1=14 x2=47 y2=46
# ICON resource ID: 350
# item 2: TEXT (0x88) disabled
# bounds: x1=62 y1=8 x2=299 y2=67
# text: "^0\n^1"
DITL_351.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=232 y1=57 x2=292 y2=77
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=137 y1=57 x2=197 y2=77
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=62 y1=8 x2=299 y2=43
# text: "^0\n^1"
# item 3: ICON (0xA0) disabled
# bounds: x1=15 y1=14 x2=47 y2=46
# ICON resource ID: 351
DITL_352.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=233 y1=69 x2=293 y2=89
# text: "OK"
# item 1: ICON (0xA0) disabled
# bounds: x1=15 y1=14 x2=47 y2=46
# ICON resource ID: 352
# item 2: TEXT (0x88) disabled
# bounds: x1=62 y1=8 x2=299 y2=58
# text: "^0\n^1"
DITL_353.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=299 y1=118 x2=359 y2=138
# text: "OK"
# item 1: ICON (0xA0) disabled
# bounds: x1=15 y1=14 x2=47 y2=46
# ICON resource ID: 350
# item 2: TEXT (0x88) disabled
# bounds: x1=62 y1=14 x2=357 y2=102
# text: "^0\n^1"
DITL_354.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=299 y1=118 x2=359 y2=138
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=195 y1=118 x2=259 y2=138
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=62 y1=14 x2=357 y2=102
# text: "^0\n^1"
# item 3: ICON (0xA0) disabled
# bounds: x1=15 y1=14 x2=47 y2=46
# ICON resource ID: 351
DITL_355.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=313 y1=113 x2=373 y2=133
# text: "OK"
# item 1: ICON (0xA0) disabled
# bounds: x1=15 y1=14 x2=47 y2=46
# ICON resource ID: 352
# item 2: TEXT (0x88) disabled
# bounds: x1=62 y1=13 x2=375 y2=100
# text: "^0\n^1"
DITL_356.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=236 y1=86 x2=296 y2=106
# text: "OK"
# item 1: ICON (0xA0) disabled
# bounds: x1=15 y1=14 x2=47 y2=46
# ICON resource ID: 352
# item 2: TEXT (0x88) disabled
# bounds: x1=62 y1=11 x2=297 y2=75
# text: "The name “^0” is already used by another module. Please use a different name."
DITL_357.txt
# 16 entries
# item 0: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=201 y1=277 x2=278 y2=293
# CNTL resource ID: 141
# item 1: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=201 y1=252 x2=278 y2=268
# CNTL resource ID: 192
# item 2: CUSTOM (0x00) enabled
# bounds: x1=29 y1=35 x2=262 y2=51
# data: ""
# item 3: CUSTOM (0x00) enabled
# bounds: x1=29 y1=56 x2=262 y2=72
# data: ""
# item 4: CUSTOM (0x00) enabled
# bounds: x1=29 y1=77 x2=262 y2=93
# data: ""
# item 5: CUSTOM (0x00) enabled
# bounds: x1=29 y1=98 x2=262 y2=114
# data: ""
# item 6: CUSTOM (0x00) enabled
# bounds: x1=29 y1=119 x2=262 y2=135
# data: ""
# item 7: CUSTOM (0x00) enabled
# bounds: x1=22 y1=28 x2=268 y2=142
# data: ""
# item 8: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=11 y1=252 x2=88 y2=268
# CNTL resource ID: 143
# item 9: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=11 y1=277 x2=88 y2=293
# CNTL resource ID: 142
# item 10: TEXT (0x88) disabled
# bounds: x1=4 y1=10 x2=84 y2=26
# text: "Module Name:"
# item 11: CUSTOM (0x80) disabled
# bounds: x1=85 y1=7 x2=248 y2=23
# data: ""
# item 12: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=4 y1=184 x2=252 y2=196
# CNTL resource ID: 144
# item 13: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=4 y1=164 x2=282 y2=176
# CNTL resource ID: 201
# item 14: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=4 y1=148 x2=258 y2=160
# CNTL resource ID: 200
# item 15: CUSTOM (0x00) enabled
# bounds: x1=6 y1=202 x2=282 y2=243
# data: ""
DITL_358.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=283 y1=165 x2=343 y2=185
# text: "OK"
# item 1: ICON (0xA0) disabled
# bounds: x1=15 y1=14 x2=47 y2=46
# ICON resource ID: 350
# item 2: TEXT (0x88) disabled
# bounds: x1=67 y1=14 x2=342 y2=159
# text: "^0"
DITL_359.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=236 y1=72 x2=296 y2=92
# text: "OK"
# item 1: ICON (0xA0) disabled
# bounds: x1=15 y1=14 x2=47 y2=46
# ICON resource ID: 352
# item 2: TEXT (0x88) disabled
# bounds: x1=62 y1=11 x2=298 y2=60
# text: "The name “^0” is not a usable module name. Please use a different name."
DITL_360.txt
# 14 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=220 y1=131 x2=280 y2=151
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=125 y1=131 x2=185 y2=151
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=14 y1=7 x2=297 y2=22
# text: "Edit the date and time for this ^0:"
# item 3: TEXT (0x88) disabled
# bounds: x1=14 y1=37 x2=275 y2=69
# text: "Original date and time:\n^1"
# item 4: TEXT (0x88) disabled
# bounds: x1=14 y1=75 x2=145 y2=91
# text: "New date and time:"
# item 5: CUSTOM (0x00) enabled
# bounds: x1=15 y1=94 x2=47 y2=115
# data: ""
# item 6: CUSTOM (0x00) enabled
# bounds: x1=46 y1=94 x2=78 y2=115
# data: ""
# item 7: CUSTOM (0x00) enabled
# bounds: x1=77 y1=94 x2=99 y2=115
# data: ""
# item 8: CUSTOM (0x00) enabled
# bounds: x1=98 y1=94 x2=138 y2=115
# data: ""
# item 9: CUSTOM (0x80) disabled
# bounds: x1=137 y1=94 x2=141 y2=115
# data: ""
# item 10: CUSTOM (0x00) enabled
# bounds: x1=140 y1=94 x2=162 y2=115
# data: ""
# item 11: CUSTOM (0x00) enabled
# bounds: x1=161 y1=94 x2=183 y2=115
# data: ""
# item 12: CUSTOM (0x00) enabled
# bounds: x1=182 y1=94 x2=208 y2=115
# data: ""
# item 13: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=211 y1=94 x2=224 y2=115
# CNTL resource ID: 158
DITL_361.txt
# 27 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=232 y1=168 x2=292 y2=188
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=152 y1=168 x2=212 y2=188
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=10 y1=5 x2=293 y2=20
# text: "Create a new Session or Expense record:"
# item 3: TEXT (0x88) disabled
# bounds: x1=10 y1=34 x2=46 y2=50
# text: "Type:"
# item 4: TEXT (0x88) disabled
# bounds: x1=10 y1=67 x2=52 y2=83
# text: "When:"
# item 5: CUSTOM (0x00) enabled
# bounds: x1=56 y1=65 x2=88 y2=86
# data: ""
# item 6: CUSTOM (0x00) enabled
# bounds: x1=87 y1=65 x2=119 y2=86
# data: ""
# item 7: CUSTOM (0x00) enabled
# bounds: x1=118 y1=65 x2=140 y2=86
# data: ""
# item 8: CUSTOM (0x00) enabled
# bounds: x1=139 y1=65 x2=179 y2=86
# data: ""
# item 9: CUSTOM (0x80) disabled
# bounds: x1=178 y1=65 x2=182 y2=86
# data: ""
# item 10: CUSTOM (0x00) enabled
# bounds: x1=181 y1=65 x2=203 y2=86
# data: ""
# item 11: CUSTOM (0x00) enabled
# bounds: x1=202 y1=65 x2=224 y2=86
# data: ""
# item 12: CUSTOM (0x00) enabled
# bounds: x1=223 y1=65 x2=249 y2=86
# data: ""
# item 13: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=252 y1=65 x2=265 y2=86
# CNTL resource ID: 158
# item 14: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=52 y1=32 x2=152 y2=52
# CNTL resource ID: 135
# item 15: EDIT_TEXT (0x10) enabled
# bounds: x1=97 y1=100 x2=165 y2=116
# text: ""
# item 16: CUSTOM (0x80) disabled
# bounds: x1=66 y1=99 x2=93 y2=117
# data: ""
# item 17: TEXT (0x88) disabled
# bounds: x1=10 y1=100 x2=66 y2=116
# text: "Amount:"
# item 18: TEXT (0x88) disabled
# bounds: x1=16394 y1=100 x2=16466 y2=116
# text: "Total Time:"
# item 19: CUSTOM (0x00) enabled
# bounds: x1=16474 y1=98 x2=16506 y2=119
# data: ""
# item 20: CUSTOM (0x00) enabled
# bounds: x1=16531 y1=98 x2=16553 y2=119
# data: ""
# item 21: TEXT (0x88) disabled
# bounds: x1=16509 y1=100 x2=16525 y2=116
# text: "hr"
# item 22: TEXT (0x88) disabled
# bounds: x1=16556 y1=100 x2=16582 y2=116
# text: "min"
# item 23: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=16586 y1=98 x2=16599 y2=119
# CNTL resource ID: 158
# item 24: CUSTOM (0x80) disabled
# bounds: x1=169 y1=99 x2=204 y2=117
# data: ""
# item 25: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=80 y1=132 x2=215 y2=152
# CNTL resource ID: 194
# item 26: TEXT (0x88) disabled
# bounds: x1=10 y1=133 x2=76 y2=149
# text: "Category:"
DITL_362.txt
# 6 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=261 y1=93 x2=327 y2=113
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=166 y1=93 x2=232 y2=113
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=18 y1=11 x2=333 y2=44
# text: "Edit the amount of this expense. You can enter up to 7 digits and a decimal point (“^0”)."
# item 3: EDIT_TEXT (0x10) enabled
# bounds: x1=141 y1=58 x2=209 y2=74
# text: ""
# item 4: CUSTOM (0x80) disabled
# bounds: x1=102 y1=57 x2=137 y2=75
# data: ""
# item 5: CUSTOM (0x80) disabled
# bounds: x1=213 y1=57 x2=248 y2=75
# data: ""
DITL_363.txt
# 28 entries
# item 0: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=217 y1=352 x2=282 y2=368
# CNTL resource ID: 160
# item 1: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=12 y1=352 x2=77 y2=368
# CNTL resource ID: 161
# item 2: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=12 y1=326 x2=77 y2=342
# CNTL resource ID: 163
# item 3: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=115 y1=326 x2=180 y2=342
# CNTL resource ID: 164
# item 4: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=217 y1=326 x2=282 y2=342
# CNTL resource ID: 165
# item 5: CUSTOM (0x80) disabled
# bounds: x1=12 y1=46 x2=282 y2=47
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=10 y1=293 x2=187 y2=306
# text: "Default category for sessions:"
# item 7: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=189 y1=291 x2=283 y2=307
# CNTL resource ID: 168
# item 8: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=22 y1=255 x2=94 y2=273
# CNTL resource ID: 191
# item 9: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=105 y1=256 x2=190 y2=272
# CNTL resource ID: 166
# item 10: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=207 y1=256 x2=272 y2=272
# CNTL resource ID: 162
# item 11: EDIT_TEXT (0x10) enabled
# bounds: x1=26 y1=230 x2=151 y2=243
# text: ""
# item 12: CUSTOM (0x80) disabled
# bounds: x1=158 y1=229 x2=183 y2=242
# data: ""
# item 13: EDIT_TEXT (0x10) enabled
# bounds: x1=186 y1=230 x2=236 y2=243
# text: ""
# item 14: CUSTOM (0x80) disabled
# bounds: x1=239 y1=229 x2=281 y2=242
# data: ""
# item 15: TEXT (0x88) disabled
# bounds: x1=22 y1=214 x2=115 y2=226
# text: "Category name:"
# item 16: TEXT (0x88) disabled
# bounds: x1=183 y1=214 x2=258 y2=226
# text: "Hourly rate:"
# item 17: CUSTOM (0x00) enabled
# bounds: x1=18 y1=183 x2=276 y2=212
# data: ""
# item 18: CUSTOM (0x00) enabled
# bounds: x1=19 y1=67 x2=259 y2=167
# data: ""
# item 19: CUSTOM (0x00) enabled
# bounds: x1=258 y1=67 x2=274 y2=167
# data: ""
# item 20: TEXT (0x88) disabled
# bounds: x1=21 y1=52 x2=112 y2=66
# text: "Category name:"
# item 21: TEXT (0x88) disabled
# bounds: x1=172 y1=52 x2=252 y2=66
# text: "Hourly rate:"
# item 22: TEXT (0x88) disabled
# bounds: x1=18 y1=25 x2=133 y2=39
# text: "Edit Categories for"
# item 23: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=134 y1=23 x2=216 y2=39
# CNTL resource ID: 159
# item 24: TEXT (0x88) disabled
# bounds: x1=18 y1=6 x2=100 y2=20
# text: "Module Name:"
# item 25: CUSTOM (0x80) disabled
# bounds: x1=102 y1=2 x2=278 y2=18
# data: ""
# item 26: CUSTOM (0x80) disabled
# bounds: x1=11 y1=176 x2=283 y2=282
# data: ""
# item 27: CUSTOM (0x80) disabled
# bounds: x1=12 y1=317 x2=282 y2=318
# data: ""
DITL_364.txt
# 8 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=218 y1=142 x2=284 y2=162
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=123 y1=142 x2=189 y2=162
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=18 y1=11 x2=291 y2=45
# text: "Enter an hourly rate here. You can enter up to 5 digits and a decimal point (“^0”)."
# item 3: EDIT_TEXT (0x10) enabled
# bounds: x1=113 y1=57 x2=164 y2=73
# text: ""
# item 4: CUSTOM (0x80) disabled
# bounds: x1=79 y1=56 x2=109 y2=74
# data: ""
# item 5: CUSTOM (0x80) disabled
# bounds: x1=168 y1=56 x2=213 y2=74
# data: ""
# item 6: RADIO_BUTTON (0x06) enabled
# bounds: x1=18 y1=90 x2=288 y2=106
# text: "Apply this rate to the current module"
# item 7: RADIO_BUTTON (0x06) enabled
# bounds: x1=18 y1=109 x2=288 y2=125
# text: "Apply to selected time period(s) only"
DITL_365.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=280 y1=60 x2=346 y2=80
# text: "Discard"
# item 1: BUTTON (0x04) enabled
# bounds: x1=185 y1=60 x2=251 y2=80
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=62 y1=14 x2=349 y2=46
# text: "Revert to the last saved version of this log file, discarding the changes you made?"
# item 3: ICON (0xA0) disabled
# bounds: x1=15 y1=14 x2=47 y2=46
# ICON resource ID: 351
DITL_366.txt
# 5 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=276 y1=60 x2=342 y2=80
# text: "Save"
# item 1: BUTTON (0x04) enabled
# bounds: x1=198 y1=60 x2=264 y2=80
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=70 y1=60 x2=157 y2=80
# text: "Don’t save"
# item 3: TEXT (0x88) disabled
# bounds: x1=68 y1=14 x2=347 y2=48
# text: "Save changes to the log file for “^0” before closing?"
# item 4: ICON (0xA0) disabled
# bounds: x1=15 y1=14 x2=47 y2=46
# ICON resource ID: 351
DITL_367.txt
# 10 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=332 y1=136 x2=398 y2=156
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=236 y1=135 x2=302 y2=155
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=64 y1=37 x2=256 y2=53
# text: "Remove/delete this module?"
# item 3: ICON (0xA0) disabled
# bounds: x1=15 y1=14 x2=47 y2=46
# ICON resource ID: 352
# item 4: RADIO_BUTTON (0x06) enabled
# bounds: x1=63 y1=64 x2=359 y2=80
# text: "Remove module from menu, but save log"
# item 5: RADIO_BUTTON (0x06) enabled
# bounds: x1=63 y1=100 x2=359 y2=116
# text: "Remove module and delete log"
# item 6: TEXT (0x88) disabled
# bounds: x1=64 y1=18 x2=158 y2=34
# text: "Module name:"
# item 7: CUSTOM (0x00) enabled
# bounds: x1=163 y1=18 x2=364 y2=34
# data: ""
# item 8: TEXT (0x88) disabled
# bounds: x1=80 y1=79 x2=405 y2=94
# text: "The log file will be moved to the folder “Inactive MultiTimer Pro Logs”"
# item 9: TEXT (0x88) disabled
# bounds: x1=80 y1=115 x2=228 y2=130
# text: "The log file will be destroyed"
DITL_368.txt
# 3 entries
# item 0: BUTTON (0x84) disabled
# bounds: x1=311 y1=105 x2=377 y2=125
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=61 y1=17 x2=378 y2=97
# text: "The Auto-Open file “^0” could not be found, probably because it has been moved, renamed or deleted. You will have to reselect it using “Auto-Open files...” under the File menu. "
# item 2: ICON (0xA0) disabled
# bounds: x1=15 y1=20 x2=47 y2=52
# ICON resource ID: 350
DITL_369.txt
# 7 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=251 y1=125 x2=360 y2=145
# text: "Stop & Switch"
# item 1: BUTTON (0x04) enabled
# bounds: x1=158 y1=125 x2=224 y2=145
# text: "Cancel"
# item 2: ICON (0xA0) disabled
# bounds: x1=15 y1=20 x2=47 y2=52
# ICON resource ID: 350
# item 3: TEXT (0x88) disabled
# bounds: x1=60 y1=36 x2=360 y2=84
# text: "The timer for this module is running. Do you want to stop that timer and switch to a new module?"
# item 4: CHECKBOX (0x05) enabled
# bounds: x1=60 y1=90 x2=362 y2=110
# text: "Start new module’s timer after switch"
# item 5: TEXT (0x88) disabled
# bounds: x1=60 y1=18 x2=154 y2=34
# text: "Module name:"
# item 6: CUSTOM (0x00) enabled
# bounds: x1=159 y1=18 x2=360 y2=34
# data: ""
DITL_370.txt
# 6 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=271 y1=85 x2=362 y2=105
# text: "Stop & Quit"
# item 1: BUTTON (0x04) enabled
# bounds: x1=179 y1=85 x2=245 y2=105
# text: "Cancel"
# item 2: ICON (0xA0) disabled
# bounds: x1=15 y1=20 x2=47 y2=52
# ICON resource ID: 350
# item 3: TEXT (0x88) disabled
# bounds: x1=60 y1=35 x2=360 y2=67
# text: "The timer for this module is running. Do you want to stop that timer and quit?"
# item 4: TEXT (0x88) disabled
# bounds: x1=60 y1=18 x2=154 y2=34
# text: "Module name:"
# item 5: CUSTOM (0x00) enabled
# bounds: x1=159 y1=18 x2=360 y2=34
# data: ""
DITL_371.txt
# 5 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=313 y1=69 x2=373 y2=89
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=66 y1=13 x2=376 y2=28
# text: "^0 Categories have been imported."
# item 2: TEXT (0x88) disabled
# bounds: x1=16450 y1=36 x2=16766 y2=49
# text: "(Only non-duplicate category names were imported.)"
# item 3: ICON (0xA0) disabled
# bounds: x1=15 y1=14 x2=47 y2=46
# ICON resource ID: 350
# item 4: TEXT (0x88) disabled
# bounds: x1=66 y1=33 x2=374 y2=61
# text: "^1 existing categories were replaced by imported categories with the same name."
DITL_372.txt
# 7 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=285 y1=138 x2=359 y2=158
# text: "Subtract"
# item 1: BUTTON (0x04) enabled
# bounds: x1=188 y1=138 x2=262 y2=158
# text: "Don’t"
# item 2: TEXT (0x88) disabled
# bounds: x1=61 y1=40 x2=361 y2=88
# text: "Your keyboard and mouse were inactive for a total of ^0 minutes since this MultiTimer Pro session was started."
# item 3: ICON (0xA0) disabled
# bounds: x1=15 y1=16 x2=47 y2=48
# ICON resource ID: 351
# item 4: TEXT (0x88) disabled
# bounds: x1=61 y1=95 x2=349 y2=128
# text: "Do you want to subtract this amount from the session time?"
# item 5: TEXT (0x88) disabled
# bounds: x1=60 y1=16 x2=154 y2=32
# text: "Module name:"
# item 6: CUSTOM (0x00) enabled
# bounds: x1=159 y1=16 x2=360 y2=32
# data: ""
DITL_373.txt
# 5 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=297 y1=60 x2=363 y2=80
# text: "Save"
# item 1: BUTTON (0x04) enabled
# bounds: x1=219 y1=60 x2=285 y2=80
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=91 y1=60 x2=178 y2=80
# text: "Don’t save"
# item 3: TEXT (0x88) disabled
# bounds: x1=70 y1=14 x2=366 y2=48
# text: "Save the new cross-log report “^0” before closing?"
# item 4: ICON (0xA0) disabled
# bounds: x1=15 y1=14 x2=47 y2=46
# ICON resource ID: 351
DITL_374.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=297 y1=137 x2=363 y2=157
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=70 y1=14 x2=364 y2=80
# text: "The ^0 file “^1” was created by a more recent version of MultiTimer Pro. It cannot be opened by the version you are using."
# item 2: ICON (0xA0) disabled
# bounds: x1=15 y1=14 x2=47 y2=46
# ICON resource ID: 352
# item 3: TEXT (0x88) disabled
# bounds: x1=71 y1=90 x2=364 y2=123
# text: "Updating your copy of MultiTimer Pro to the most recent version will correct this."
DITL_375.txt
# 5 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=314 y1=129 x2=374 y2=149
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=226 y1=130 x2=290 y2=150
# text: "Cancel"
# item 2: ICON (0xA0) disabled
# bounds: x1=15 y1=14 x2=47 y2=46
# ICON resource ID: 350
# item 3: TEXT (0x88) disabled
# bounds: x1=62 y1=13 x2=379 y2=75
# text: "Click “OK” below and the settings of the log window “^0” will become the default settings for new logs. "
# item 4: TEXT (0x88) disabled
# bounds: x1=62 y1=73 x2=381 y2=123
# text: "These settings include which “Show ...” buttons are on, and any categories you have defined for the log."
DITL_376.txt
# 5 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=315 y1=146 x2=375 y2=166
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=227 y1=147 x2=291 y2=167
# text: "Cancel"
# item 2: ICON (0xA0) disabled
# bounds: x1=15 y1=14 x2=47 y2=46
# ICON resource ID: 350
# item 3: TEXT (0x88) disabled
# bounds: x1=61 y1=14 x2=378 y2=76
# text: "Click “OK” below and the settings of the floating window for the module “^0” will become the default settings for new modules. "
# item 4: TEXT (0x88) disabled
# bounds: x1=61 y1=85 x2=380 y2=135
# text: "These settings are the size and position of the floating window, and the value of the total time popup menu."
DITL_377.txt
# 1 entries
# item 0: CHECKBOX (0x05) enabled
# bounds: x1=15 y1=8 x2=217 y2=24
# text: "Don’t print ignored records"
DITL_378.txt
# 6 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=265 y1=93 x2=356 y2=113
# text: "Stop & Close"
# item 1: BUTTON (0x04) enabled
# bounds: x1=173 y1=93 x2=239 y2=113
# text: "Cancel"
# item 2: ICON (0xA0) disabled
# bounds: x1=15 y1=20 x2=47 y2=52
# ICON resource ID: 350
# item 3: TEXT (0x88) disabled
# bounds: x1=60 y1=35 x2=352 y2=84
# text: "The timer for this module is running in timer #^0. Do you want to stop that timer and close it?"
# item 4: TEXT (0x88) disabled
# bounds: x1=60 y1=18 x2=154 y2=34
# text: "Module name:"
# item 5: CUSTOM (0x00) enabled
# bounds: x1=159 y1=18 x2=360 y2=34
# data: ""
DITL_379.txt
# 3 entries
# item 0: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=9 y1=8 x2=329 y2=23
# CNTL resource ID: 185
# item 1: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=20 y1=25 x2=236 y2=40
# CNTL resource ID: 186
# item 2: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=20 y1=41 x2=265 y2=56
# CNTL resource ID: 187
DITL_380.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=290 y1=141 x2=356 y2=161
# text: "OK"
# item 1: ICON (0xA0) disabled
# bounds: x1=15 y1=20 x2=47 y2=52
# ICON resource ID: 352
# item 2: TEXT (0x88) disabled
# bounds: x1=63 y1=20 x2=355 y2=86
# text: "The file “^0” is already used as an Auto-Start file for the module “^1”, so you can’t use it as an Auto-Start file for this module. "
# item 3: TEXT (0x88) disabled
# bounds: x1=62 y1=93 x2=357 y2=129
# text: "Please remove this file from the list, or turn off the ‘Start timer...’ checkbox."
DITL_381.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=283 y1=105 x2=343 y2=125
# text: "OK"
# item 1: ICON (0xA0) disabled
# bounds: x1=15 y1=14 x2=47 y2=46
# ICON resource ID: 350
# item 2: TEXT (0x88) disabled
# bounds: x1=67 y1=14 x2=342 y2=98
# text: "An Auto-Start file for the MultiTimer Pro module “^0” has been opened. However, another module’s timer is currently running. You must handle this situation manually."
DITL_400.txt
# 8 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=237 y1=147 x2=370 y2=167
# text: "Fill Out Order Form"
# item 1: BUTTON (0x04) enabled
# bounds: x1=114 y1=147 x2=201 y2=167
# text: "Enter Code"
# item 2: BUTTON (0x04) enabled
# bounds: x1=13 y1=147 x2=78 y2=167
# text: "Not Yet"
# item 3: CUSTOM (0x80) disabled
# bounds: x1=9 y1=31 x2=373 y2=133
# data: ""
# item 4: TEXT (0x88) disabled
# bounds: x1=39 y1=8 x2=343 y2=24
# text: "This is an unregistered copy of MultiTimer Pro"
# item 5: TEXT (0x88) disabled
# bounds: x1=16 y1=38 x2=366 y2=106
# text: "To purchase MultiTimer Pro, click “Fill Out Order Form” below. Once you have paid for MultiTimer Pro, you will receive a registration code to turn off these reminders. \n\nIf you have your registration code, click “Enter Code”."
# item 6: TEXT (0x88) disabled
# bounds: x1=16 y1=114 x2=368 y2=130
# text: "If you are just trying out MultiTimer Pro, click “Not Yet”."
# item 7: UNKNOWN (0x81) disabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: 00010190
DITL_401.txt
# 8 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=178 y1=196 x2=243 y2=216
# text: "Register"
# item 1: BUTTON (0x04) enabled
# bounds: x1=21 y1=195 x2=79 y2=215
# text: "Cancel"
# item 2: EDIT_TEXT (0x10) enabled
# bounds: x1=21 y1=120 x2=246 y2=136
# text: ""
# item 3: EDIT_TEXT (0x10) enabled
# bounds: x1=21 y1=161 x2=246 y2=177
# text: ""
# item 4: TEXT (0x88) disabled
# bounds: x1=17 y1=37 x2=253 y2=89
# text: "Please enter your name and registration code as you received them. You may correct the capitalization of your name, but make no other changes."
# item 5: TEXT (0x88) disabled
# bounds: x1=17 y1=7 x2=208 y2=24
# text: "Thank you for your support!"
# item 6: TEXT (0x88) disabled
# bounds: x1=18 y1=104 x2=84 y2=117
# text: "Your name:"
# item 7: TEXT (0x88) disabled
# bounds: x1=18 y1=145 x2=156 y2=158
# text: "Your registration code:"
DITL_402.txt
# 5 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=242 y1=110 x2=307 y2=130
# text: "Exit"
# item 1: BUTTON (0x04) enabled
# bounds: x1=22 y1=110 x2=155 y2=130
# text: "Fill Out Order Form"
# item 2: TEXT (0x88) disabled
# bounds: x1=16 y1=14 x2=311 y2=29
# text: "This copy of MultiTimer Pro is registered to:"
# item 3: CUSTOM (0x80) disabled
# bounds: x1=16 y1=37 x2=290 y2=53
# data: ""
# item 4: TEXT (0x88) disabled
# bounds: x1=16 y1=63 x2=316 y2=95
# text: "If you would like to order additional copies of MultiTimer Pro, click “Fill Out Order Form”."
DITL_403.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=301 y1=147 x2=361 y2=167
# text: "OK"
# item 1: ICON (0xA0) disabled
# bounds: x1=15 y1=14 x2=47 y2=46
# ICON resource ID: 350
# item 2: TEXT (0x88) disabled
# bounds: x1=63 y1=14 x2=367 y2=81
# text: "You have used MultiTimer Pro for more than ^0 days, but you have not yet paid for it. Because of this, the program will now run in “obnoxious mode” until it is registered. "
# item 3: TEXT (0x88) disabled
# bounds: x1=63 y1=89 x2=369 y2=141
# text: "This means that the “Unregistered” reminder will appear frequently as you use MultiTimer Pro. Please register soon."
DITL_500.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=211 y1=88 x2=271 y2=108
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=67 y1=13 x2=281 y2=80
# text: "^0\n^1^2^3"
# item 2: ICON (0xA0) disabled
# bounds: x1=19 y1=11 x2=51 y2=43
# ICON resource ID: 500
DITL_600.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=312 y1=113 x2=372 y2=133
# text: "OK"
# item 1: ICON (0xA0) disabled
# bounds: x1=15 y1=14 x2=47 y2=46
# ICON resource ID: 352
# item 2: TEXT (0x88) disabled
# bounds: x1=62 y1=14 x2=372 y2=46
# text: "MultiTimer Pro is low on memory, and the last attempted function could not be completed.\n"
# item 3: TEXT (0x88) disabled
# bounds: x1=62 y1=55 x2=373 y2=105
# text: "You should quit now and increase MultiTimer Pro’s memory allocation using the Finder’s “Get Info” function."
DITL_602.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=322 y1=172 x2=382 y2=192
# text: "OK"
# item 1: ICON (0xA0) disabled
# bounds: x1=15 y1=14 x2=47 y2=46
# ICON resource ID: 352
# item 2: TEXT (0x88) disabled
# bounds: x1=62 y1=14 x2=377 y2=82
# text: "The log file “^0” is corrupted and could not be repaired. This may have been caused by a system crash or disk error. "
# item 3: TEXT (0x88) disabled
# bounds: x1=62 y1=84 x2=377 y2=164
# text: "You may need to trash the file “^0” to continue to use MultiTimer Pro. If there is very important information in this log file, contact KarlBunker@aol.com; we may be able to repair the file."
DITL_603.txt
# 5 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=298 y1=135 x2=358 y2=155
# text: "OK"
# item 1: ICON (0xA0) disabled
# bounds: x1=15 y1=14 x2=47 y2=46
# ICON resource ID: 352
# item 2: TEXT (0x88) disabled
# bounds: x1=61 y1=14 x2=357 y2=62
# text: "An error of unknown cause has occurred. If this recurs, it should be reported to Karl Bunker at KarlBunker@aol.com."